Schecter PT: Truss Rod/Saddle Wrench Sizes?

[FenderGuy53]

Does anyone familiar with a Schecter PT Standard or Fastback know the correct sizes for the truss rod wrench and saddle wrench?

Thanks for any help.

 

[Evan Skopp]

Re: Schecter PT: Truss Rod/Saddle Wrench Sizes?

I ran this past Shigeki Aoshima from Schecter Guitar Research. Here's what he told me:

Truss rod wrench should be 4mm or 5/32” (3.96875mm) could fit (slightly loose but fits almost perfectly). USA models are currently using 9/64” wrench. (We used to build guitar with 1/8”, 5/32” before that)

As for the bridge saddle string action adjustment screws, it is metric and 1.5mm is the one should fit.​

I hope that helps.

- EAS

 

[FenderGuy53]

Re: Schecter PT: Truss Rod/Saddle Wrench Sizes?

I ran this past Shigeki Aoshima from Schecter Guitar Research. Here's what he told me:

Truss rod wrench should be 4mm or 5/32” (3.96875mm) could fit (slightly loose but fits almost perfectly). USA models are currently using 9/64” wrench. (We used to build guitar with 1/8”, 5/32” before that)

As for the bridge saddle string action adjustment screws, it is metric and 1.5mm is the one should fit.​

I hope that helps.

- EAS

Absolutely does! Thanks a million.

 

[FenderGuy53]

Re: Schecter PT: Truss Rod/Saddle Wrench Sizes?

Now confirmed. The correct sizes are 4mm for the truss rod and 1.5mm for the bridge saddles.