I recently took apart an APH-1 Alnico II pro and "without thinking" took apart the four-conductor wiring and ground from the pickup. After a week, I'm looking at the leads coming from each of the single coils and see that they are one black and one white that I need to reconnect to the four color-coded wires that I initially removed.
The question being; From the 4 conductor wire; Are the red and green supposed to go the north 'slug' bobbin and the black and white to the south 'screw' bobbin?
I can find the wiring diagram online that indicates where each conductor is supposed to go, but I can't differentiate which wire from the bobbins is the start and which one is the finish. Black or white?
I can explain further if someone has an idea on this. Thanks for reading.
The question being; From the 4 conductor wire; Are the red and green supposed to go the north 'slug' bobbin and the black and white to the south 'screw' bobbin?
I can find the wiring diagram online that indicates where each conductor is supposed to go, but I can't differentiate which wire from the bobbins is the start and which one is the finish. Black or white?
I can explain further if someone has an idea on this. Thanks for reading.