Series Parallel, Coil Split and Phase Switching

[AG2997]

Hello,
My knowledge about guitar wiring is quite limited, so I may sound like a complete idiot in this post.

Is it possible to have series-parallel switching, phase-switching and coil-splitting on the bridge humbucker of an HSS Strat using 3 push pull ports for each of the 3 switchings?

It would be very helpful if someone could provide a diagram, I find those easy to understand .

The pickups I would use are:
Bridge: Duncan SH-5 Custom
Middle: Dimarzio Area 67
Neck: Dimarzio Area 61

Thanks

 

[GuitarDoc]

Re: Series Parallel, Coil Split and Phase Switching

Have you tried looking for diagrams on seymourduncan.com, go to the "support" tab, click on "wiring diagrams", in the "humbuckers" section you can select the diagram you need (sometimes you have to apply the wiring schemes located in more than one diagram), then click on "submit".

 

[Funkfingers]

Re: Series Parallel, Coil Split and Phase Switching

+1

The idea is do-able. I pity the poor SH-5, having all of that extra wiring going on between it and the selector switch.

Be aware that the phase reversal switch will affect which coil of the humbucker is operational when the Split switch is engaged.