Setting up a twisted neck on Super strat advice

Re: Setting up a twisted neck on Super strat advice

If it has jumbo frets that are'nt too worn ..use a fret leveller (long one) to level your frets. Get them level (straight) ignoring the neck's twist (ie..just get them level in relation to each other ignoring the radius/twist in the fretboard surface...does'nt matter if they're higher/lower at one or the other end as long as the surface is a 'tabletop') ....If the twist is'nt too severe this will work & it'll be playable...though the neck will still be twisted (worked for my old Ibby Destroyer) :D
 
Re: Setting up a twisted neck on Super strat advice

Plenty of twist...it is Jerry after all :)


i-own-a-ds38j4.jpg
 
Back
Top