Johnny the Kid
Shaunofthedeadologist
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
That is a lot of Wamplering.
That is a lot of Wamplering.
Show me your pedalboards. I'm bored and I want to see some board ideas.
- Thread starter GuitarFanatic
- Start date
ZSSelectronics
New member
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
I use modded BCB-60, I took out everything from inside and use only the case.
also there is additional place in the corner for footswitch or distortion pedal, depends if i take an amp with me or leave it at home)))
I use modded BCB-60, I took out everything from inside and use only the case.
also there is additional place in the corner for footswitch or distortion pedal, depends if i take an amp with me or leave it at home)))
Last edited:
Agileguy_101
Master of his Domain
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
Nice mini board you've got there Bruce. Are you using this with the DSL?
Here is my board for my new classic rock gig. I am using the gain from the amp.
Nice mini board you've got there Bruce. Are you using this with the DSL?
skyydogg01
New member
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
Boss TU-2 Tuner > Blackstar LT Dual > Boss BF-2 Flanger
The amp footswitch is on there too but I don't use it.
Mine looks much like this one ...Keepin it simple. My amp footswitch sits off to the side.
Boss TU-2 Tuner > Blackstar LT Dual > Boss BF-2 Flanger
The amp footswitch is on there too but I don't use it.
XSSIVE
OCDologist
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
I see you've stuck with the Jake E Lee BF-2 settings, me too. Seems to be the perfect setting for everything I do with a flanger.
Keepin it simple. My amp footswitch sits off to the side.
I see you've stuck with the Jake E Lee BF-2 settings, me too. Seems to be the perfect setting for everything I do with a flanger.
ErikH
Well-known member
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
Yup. I love the sound. I even use it during clean settings for a heavy chorus like affect.
Yup. I love the sound. I even use it during clean settings for a heavy chorus like affect.
ErikH
Well-known member
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
Although I see a lot putting the tuner first, and I used to as well, I like it better at the end to mute to the whole board.
Although I see a lot putting the tuner first, and I used to as well, I like it better at the end to mute to the whole board.
XSSIVE
OCDologist
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
I do the same thing. I went full circle with flangers from BF-2 to grey MXR to MXR micro to MXR EVH to BF-2 and the BF-2 is the only one that seems to work well with clean tone, gainy rhythm and lead tones. The MXR stuff seems to be better for typical VH and Barracuda type flange and that's about it.
I do the same thing. I went full circle with flangers from BF-2 to grey MXR to MXR micro to MXR EVH to BF-2 and the BF-2 is the only one that seems to work well with clean tone, gainy rhythm and lead tones. The MXR stuff seems to be better for typical VH and Barracuda type flange and that's about it.
PFDarkside
of the Forum
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
Mike/Erik, have you tried the HF-2?
Mike/Erik, have you tried the HF-2?
ErikH
Well-known member
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
The High-Band Flanger? Yeah, and I hated it. I could hear choppiness in the effect and didn't like how it made the high frequencies sound. It simply isn't warm enough for my taste. Before the BF-2 I had a BF-2B (Bass Flanger) and that one rocks in a guitar rig.
The High-Band Flanger? Yeah, and I hated it. I could hear choppiness in the effect and didn't like how it made the high frequencies sound. It simply isn't warm enough for my taste. Before the BF-2 I had a BF-2B (Bass Flanger) and that one rocks in a guitar rig.
PFDarkside
of the Forum
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
I feel like I've asked you this before...
We must have different preferences in Flangers, I like the light swirling in the high frequencies with the bass remaining less effected. But the BF has lived on and the HF has been long since discontinued...
I feel like I've asked you this before...
We must have different preferences in Flangers, I like the light swirling in the high frequencies with the bass remaining less effected. But the BF has lived on and the HF has been long since discontinued... 
Lazarus1140
New member
Re: Show me your pedalboards. I'm bored and I want to see some board ideas.
This is my large board except the Ecstacy belongs on my small board (in progress). The OD I use on this boad is a Piedmont Custom Electronics AF II. It is on vacation.
Tuner>C9>Pharaoh>AF II/Ecstacy>El Capistan>AD999>Supa-Trem>Wet Reverb>Ditto - Powered by a Pedal Power 2 Pus + (1) One Spot.
Normally I run the tuner last. The reason it's not that way now has to do with the space arrangement and my lack of motivation to move everything after some recent changes. I had a Peterson tuner where the Ditto now resides and a Mini Bi-Comp where the tuner now sits, so I matched the new pieces to the spots where they fit with the least disruption.
The small board is in the "deciding on materials" stage. I have the pedals, but I want it to be much lighter than this board and still have an elevated top row.
This is my large board except the Ecstacy belongs on my small board (in progress). The OD I use on this boad is a Piedmont Custom Electronics AF II. It is on vacation.
Tuner>C9>Pharaoh>AF II/Ecstacy>El Capistan>AD999>Supa-Trem>Wet Reverb>Ditto - Powered by a Pedal Power 2 Pus + (1) One Spot.
Normally I run the tuner last. The reason it's not that way now has to do with the space arrangement and my lack of motivation to move everything after some recent changes. I had a Peterson tuner where the Ditto now resides and a Mini Bi-Comp where the tuner now sits, so I matched the new pieces to the spots where they fit with the least disruption.
The small board is in the "deciding on materials" stage. I have the pedals, but I want it to be much lighter than this board and still have an elevated top row.
Last edited:
