Simple Wiring diagram I can't find

[KRKBAB]

Sometimes it's the simple things you can't find!

I have an H/H, 1 vol 1 tone, 3 way toggle guitar.
I know how to wire it the most basic way- BUT- I want to wire it so the bridge pick-up by-passes the tone pot.
So, the only question I really have is-

where does the hot wire from the bridge get connected to?

ps- I am using the right terminal (not the central) of each pot to ground.

 

[Funkfingers]

Re: Simple Wiring diagram I can't find

Easiest solution is to connect Bridge PU directly to selector switch and Neck PU via tone control before the selector switch. Obviously, with both pickups selected, the tone pot affects both pickups.

 

[Funkfingers]

Re: Simple Wiring diagram I can't find

Second solution is conventional wiring plus "blower" switch.

 

[KRKBAB]

Re: Simple Wiring diagram I can't find

Easiest solution is to connect Bridge PU directly to selector switch and Neck PU via tone control before the selector switch. Obviously, with both pickups selected, the tone pot affects both pickups.

?
sorry- I'm a bit confused- I already have the Br. p'up going straight to the 3 way toggle- like this: http://www.guitarelectronics.com/pr...ckers3-Way-Toggle-Switch1-Volume0Tone000.html

if it's not too much trouble, could you base you suggestions on this diagram?- Thanks,
Kurt

 

[Funkfingers]

Re: Simple Wiring diagram I can't find

I could if I were not posting via smartphone. Later.

 

[KRKBAB]

Re: Simple Wiring diagram I can't find

That's fine- I will check later

thank you