Splawn/BKP/Patrick Eggle: Whitesnake cover tune

Brow

New member
Hey guys.

Here's a clip I recorded whilst I was off work yesterday:

http://soundcloud.com/browsif/fool-for-your-lovin-hds

For anyone that may be interested this is the signal chain:

Patrick Eggle Climaxe Guitar: Ash body/Anegree cap, Maple neck/Rosewood fretboard, Floyd Rose Trem, BKP Holy Diver Pickups in bridge and neck.

Splawn Quick Rod Amp: Gear 2 with gain at 6, EQs to taste (depending on the track). The amps volumes were on about 3, with the overall level being controlled by the FX Loop Master Volume that these amps have. It affects the tone ever so slightly, but not enough that I won't use it and go deaf instead!

Zilla Cabs 'Fatboy' with 2 Celestion Vintage 30s

Audix I5 mic for close miking, Blue Baby Bottle for room miking

M-Audio Cheapie Audio Interface and Mic Pre Amp

There were 3 guitar parts recorded: main thythm parts (1 take) and 2 harmony parts (1 take each).

I appreciate that the playing is a bit ropey and there's timing issues, but I struggled to hear the backing track due to being in the same room as the amp :lol:

There's no post production done at all apart from a bit of panning of the various tracks and some housekeeping tidying up the stray noises when not recording.

It was also done in the dining room of my house so there's no acoustic treatment etc and there's furniture vibrating which I don't think you can hear but I'm sure someone will point it out :banghead:

Cheers.

Craig
 
Last edited:
Re: Splawn/BKP/Patrick Eggle: Whitesnake cover tune

Rubbish! You need to get rid of that Splawn, it's doing you no favours at all!! :D

Seriously, cool tones there Craig.
 
Re: Splawn/BKP/Patrick Eggle: Whitesnake cover tune

I can almost visualize Tawny Kitean writhing around all over a car or something.... NICE!!

Man, I miss my splawn! (needs tubes)

Awesome work
 
Back
Top