Re: Squealing with Antiquity Jaguar Pickups
I'm in a Jaguar state of mind, so here's a PSA from me pulling out mine: Happened to notice increased noise/squeal from the bridge pickup versus my recollection. I don't often play my Jaguar to be honest... It's more of a case queen lately so it could have been a while, who knows.
Touched the claw; buzzed. Checked continuity; yep, turns out the claw was un-grounded. I'm not certain how the claw on the Antiquities are, but on the SJAG-1 it's a wire along the bottom of the pickup that just sandwiches itself against the claw. If it won't contact the claw, you can (conveniently) pry up a bit; or you can solder the thing, but the magnet will hold the cover on and ground it on its own. Believe it actually was soldered with the stock pickups (but it's been a while,) perhaps Antiquities are the same.
I'm sure ditching the claw would result in less squeal, but you'd lose some shielding (don't know about you but my Jaguar is quiet...) Not to mention a change in the tone.