ST59 and a single coil neck. Will a 5 way do this?

cussass

New member
Hi all. Here's what I want. I want to put in my tele an st 59 with a single coil neck pup. I want to have the following. Position is from the rear.
I hate push/pull knobs and added switches so I want it done via 5 way if possible.
1) humbucking
2) single
3) both pups with bridge humbucking
4) both pups with bridge single (in series)
5) neck pup

Can this be done with a 5 way switch? If so, which one should I buy? Thank you.
 
Re: ST59 and a single coil neck. Will a 5 way do this?

Check the wiring section in the main website.
There is definitely something there though maybe
for a tapped bridge pickup.
Just hook up the split output from the 59 to where
the tapped would go. It will do what you want but
not sure if in that order.
 
Re: ST59 and a single coil neck. Will a 5 way do this?

Hi all. Here's what I want. I want to put in my tele an st 59 with a single coil neck pup. I want to have the following. Position is from the rear.
I hate push/pull knobs and added switches so I want it done via 5 way if possible.
1) humbucking
2) single
3) both pups with bridge humbucking
4) both pups with bridge single (in series)
5) neck pup

Can this be done with a 5 way switch? If so, which one should I buy? Thank you.

yes, that can be done. check the support section for the wiring diagrams. you may need to patch a few diagrams together. if you can't find the exact thing or have more questions, call the 800 # and ask for tech support.... you know, make those cats earn their scratch. lol!
 
Back
Top