Starting the pickup swap on my latest Ehdwuld branded guitar

ehdwuld

ehdwuld

A Ficus
So i started by removing the pickups

https://i.imgur.com/HLk4tA4.jpeg


The piezo bridge is bigger which is good
the saddles are all facing the same way and i may need the rooom for intonation
I'd hate to have to turn one around

URL]


almost posted my cc OOPS

URL]



Wiring the triple shot rings


{IMG}https://i.imgur.com/77uDAj0.jpeg{/IMG}

Had to open the adjustment screw hole for to 3mm or 1/8 inch

https://i.imgur.com/Cj89CBM.jpeg

Anyone want these Chinese pickups they dont sound bad

https://i.imgur.com/CaxPpHU.jpeg


Ill add pictures in a min
Getting an error now

edit well that didnt work either
 
Last edited:
Sorry- the pics aren't working yet. The fix for now is just host them somewhere.
 
ehdwuld said:
So i started by removing the pickups

https://i.imgur.com/HLk4tA4.jpeg


The piezo bridge is bigger which is good
the saddles are all facing the same way and i may need the rooom for intonation
I'd hate to have to turn one around

ndnvpQo.jpeg


almost posted my cc OOPS

URL]



Wiring the triple shot rings


{IMG}https://i.imgur.com/77uDAj0.jpeg{/IMG}

Had to open the adjustment screw hole for to 3mm or 1/8 inch

https://i.imgur.com/Cj89CBM.jpeg

Anyone want these Chinese pickups they dont sound bad

https://i.imgur.com/CaxPpHU.jpeg


Ill add pictures in a min
Getting an error now

edit well that didnt work either
Click to expand...

Try this
 
well it wont let me do more than the one
its the url tags mixed in that prevent the images from showing up
if I replace the url tags with IMG tags it puts one picture up
but not more than one
I get the error if I do more than this one

its like the site sees what I am doing and goes
oh no, you got me the last time not agian......
 
ok video works

here is a play-through
what we did was:
new Pickups - Donlis set matching the JB/Jazz specs that I love so much
Triple Shot Rings - Flat ones not the carved top version
Kiash piezo bridge with 100K linear pot

the guitar now has no tone and independent volumes for the magnetic pickups and the Piezo

 
rolled the edges of the finger board with an emory board
its still rough so you can see the process some wiping and polish gets the tool marks off

you can see in the sharp edge on the un finished section



ObzfvPU.jpg
 
You must log in or register to reply here.
Back
Top