Struggling to get good sound out of HT-5RH head

S

spleenharvester

New member
I bought a Blackstar HT-1, upgraded it with a Tung-Sol 12AX7 and an Electro-Harmonix 12AU7 + a Celestion Super 8 speaker. Put a Tech21 Sansamp Classic in front of it and absolutely loved it, it's the tone I've been trying to chase for years.

I found a 2012 Blackstar HT-5 for a silly price so I snagged it, along with a Harley Benton 2x12 with Vintage 30s. I upgraded the preamp again to a Tung-Sol 12AX7, but the power tube is an Electro-Harmonix 12BH7AEH which I think hasn't been changed since the amp was manufactured.

The problem I'm having is that the HT-5 sounds... really shrill, and doesn't quite nail the tone I managed to get from the HT-1. Like at the same volume as the HT-1 it physically hurts my ears to be near it.

Could a knackered power tube do this or is something else the matter? Also it seems like the bass/treble/mid controls don't work on the clean channel and only on the OD channel, is this by design?
 
I’m somewhat inclined to blame the speakers. I ran my old HT-5 through a 2x12 with a pair of Eminence Governors. It had no bottom end at all. Swapping one out for a Wizard helped immensely.

To get a cheaper but not as effective solution, try a new production Mullard 12AX7. My experience with Tung-Sol is that they are very bright.
 
I would bet you are used to a super punchy 8" speaker and in order to get the 1/2 of the punch on twin 12" V30s you would need to crank that loud loud loud -but 5watts from that head is going to have real trouble doing so.
 
My Peavey Lunchbox and Orange Micro both sounded horrible through my 4x12 until I was patient and dialed them in just right.
 
Thanks all - seems to have just been a breaking in issue, I left it running for several hours on one of those white noise videos and it's already sounding a lot better. Hopefully the new power tube helps too.
 
You must log in or register to reply here.
Back
Top