Sugestions on Power Level Switch

[Burkwieser]

I am going to get my RT2/50 modded by Egnater and I am adding a power level switch. How low should I go? I was thinking 50 watts to 25 watts. Should I go even lower? Maybe down to 10 watts? I say 10, because I have seen some Egnater amps that have a 50 watts to 10 watts switch in them.

 

[y2stevo]

Re: Sugestions on Power Level Switch

If you could get it for a choice of say three I'd go 50,20,10 but if not mabye 50 and 15 or mabye even 20 if there possible..

 

[italic zero]

Re: Sugestions on Power Level Switch

How about... 15 sounds good to me

 

[y2stevo]

Re: Sugestions on Power Level Switch

Yhe i think 15 would be good... Its not to low but not too high either.. even if you could only say turn it up to 7 for whereever you were playing your still cooking those tubes fairly hard and if you got a 10watt the chances are you would nedd a bit more power to be heard...

 

[darkshadow54321]

Re: Sugestions on Power Level Switch

50, 25 and 10. That way you can have a great sound at home too. Go even lower if you wanna play at home a lot.

 

[Burkwieser]

Re: Sugestions on Power Level Switch

Thanks for the input guys. I think I am going to check on the 50, 25, and 10. It seems a very versatile way to go.