Tele, tapped 5 wiring with different order

[psl2806]

SD has a wiring schema for the telecaster for use of a 5 way switch with a coil tapped pickup in the bridge and a normal single coil in the bridge. https://www.seymourduncan.com/wirin...s,neck-s,bridge-s,1-volume,1-tone,5-way-blade
It uses this switch order:
1. Lead tapped
2. Lead tapped + bridge
3. Brdige
4. Lead full + brdige
5. Lead full
I find the order confusing when using a different tele which has the normal 3 way switch.
Woul it be possible to have it in this order?
1. Brdige
2. Lead tapped + bridge
3. Lead full + brdige
4. Lead tapped
5. Lead full
Can it be done with the same switch or do I need a super switch?
Thanks!

 

[AlexR]

Re: Tele, tapped 5 wiring with different order

Your diagram has a neck and bridge pickup. The bridge pickup has the tap.

Maybe you could re-arrange your wants so that the neck pickup is in there - lead and bridge refer to the same thing.

 

[jeremy]

Re: Tele, tapped 5 wiring with different order

right, that does make any sense.

a tapped tele could be wired

1-full bridge
2-full bridge + neck
3-neck
4-tapped bridge + neck
5-tapped neck

 

[Mincer]

Re: Tele, tapped 5 wiring with different order

Or use a Super Switch and get pretty much any combo you want (f there is enough room).