rtcook
New member
Hi all,
First post for me. I apologize if any of this has been repeated, but I need opinions on this setup. I have a newer Kramer Voyager that has the three original humbuckers in it and I hate them. They are individually controlled with three on/off toggle switches. It has a licensed Floyd Rose as well. I want to change out the pickups for some Seymour Duncans. What I have in mind is a TB-2N for the neck, a TB-4 for the middle and a TB-10 for the bridge. If anyone is familiar with Kramers, they made a Nightswan model that had two humbuckers in it. They were in the bridge and middle positions. No neck pickup was used. From what I have read they used the TB-10 in the bridge and the TB-4 in the middle just like I want to do. I am just filling in the neck with a TB-2N. My other though is using the TB-12 instead of the TB-10 in the bridge. I like the sound of the TB-12 better than the TB-10 on the SD website, but I have been told it might not be as good of a mate for the TB-4 in the middle position. What do you guys think? What combination do you recommend? I also want to change out the three ON/OFF toggles to ON/OFF/ON so I can have each pickup either SERIES/OFF/SPLIT. Comments welcomed on that thought as well.
Thanks in advance for any help you can give me,
Roger
First post for me. I apologize if any of this has been repeated, but I need opinions on this setup. I have a newer Kramer Voyager that has the three original humbuckers in it and I hate them. They are individually controlled with three on/off toggle switches. It has a licensed Floyd Rose as well. I want to change out the pickups for some Seymour Duncans. What I have in mind is a TB-2N for the neck, a TB-4 for the middle and a TB-10 for the bridge. If anyone is familiar with Kramers, they made a Nightswan model that had two humbuckers in it. They were in the bridge and middle positions. No neck pickup was used. From what I have read they used the TB-10 in the bridge and the TB-4 in the middle just like I want to do. I am just filling in the neck with a TB-2N. My other though is using the TB-12 instead of the TB-10 in the bridge. I like the sound of the TB-12 better than the TB-10 on the SD website, but I have been told it might not be as good of a mate for the TB-4 in the middle position. What do you guys think? What combination do you recommend? I also want to change out the three ON/OFF toggles to ON/OFF/ON so I can have each pickup either SERIES/OFF/SPLIT. Comments welcomed on that thought as well.
Thanks in advance for any help you can give me,
Roger
Last edited: