Unbranded JJs in EVH amp?

[jeremy]

v1 and the pi are the most important tonally in 95% of amps. swapping the others wont hurt but wont make as significant a difference

 

[Explorer84]

They are ECC83s. I immediately noticed the difference in changing the PI a nd V1 only - much more open, less grainy and congested, Brighter? not sure but I am still waiting delivery of the other 2 to swap in. I can always dial it out if it gets too spikey, but I am liking what I hear much more now.

The 83S and 803S is what I use. They're great tubes. The 803S is, to me, a great sounding tube in V1. Good to hear that you're dialing in your amp. Be careful, tube rolling can get crazy!

 

[misterwhizzy]

My mistake. The JJ's that you have are they the 83s or the 803's? The Sovtek LPS is a standard tube for the phase inverter. In my experience, the Tung Sol's are going brighten your amp up considerably. I put one in the V1 slot and couldn't pull it out fast enough. I tried it in the V2 slot but didn't like the sound of it there either. They're good tubes. Very clean/clear sounding but too bright for me. Good luck.

I had a similar experience. RI Mullards hit the sweet spot for me.

 

[JMP/HBE]

JJ Le Pew la poo poo .....

 

[Rex_Rocker]

The 83S and 803S is what I use. They're great tubes. The 803S is, to me, a great sounding tube in V1. Good to hear that you're dialing in your amp. Be careful, tube rolling can get crazy!

Not in an EVH, though. They are fantastic-sounding, I agree. But the long plate makes them prone to microphonics, ESPECIALLY in something as high-gain as an EVH.

JMO.

 

[Explorer84]

I had a similar experience. RI Mullards hit the sweet spot for me.

I tried the CV4004 and the 12ax7/ECC 83. I have to say, those are very good tubes as well. They didn't have the tone I was looking for. In a pinch, I wouldn't hesitate to throw one in my amp.

 

[AniML]

The 83S and 803S is what I use. They're great tubes. The 803S is, to me, a great sounding tube in V1. Good to hear that you're dialing in your amp. Be careful, tube rolling can get crazy!

Well as it turns out, the Tung Sol in V2 is way to bright / brittle and made there is no discernable difference in the loop. So I guess for now I will stick with the OE glass in those spots

 

[JMP/HBE]

Wat is this va-Jay-Jay you speak of ?

 

[jeremy]

i love those amperex tubes, but they are expensive these days. ive had fine luck with jj tubes overall

 

[Explorer84]

Wat is this va-Jay-Jay you speak of ?

va-Jay-Jay !:lmao: