What do I do to use my HRD like a head for a cabnet

[Kac]

I would like to use my Fender Hot Rod Deluxe to power external speaker cabnets, but it's doesn't have an output for external speakers...

So, what do I do?

-kac

 

[kmcguitars]

Re: What do I do to use my HRD like a head for a cabnet

I would like to use my Fender Hot Rod Deluxe to power external speaker cabnets, but it's doesn't have an output for external speakers...

So, what do I do?

-kac

RTFM The HRD has a 8 ohm Ext. speaker jack . Take a look underneath.
The transformer has a 4 ohm tap. So you can run 2 8 ohm loads.
(i.e) the stock speaker and a 8 ohm cab.

 

[gordon_39422]

Re: What do I do to use my HRD like a head for a cabnet

MY HRDx has two speaker jacks on the back.... the one the stock speaker is plugged into and one to the right if you are looking at it from the back... IN the back left hand side of the cab, you should see a sticker that describes the speaker load... It not, the load is 40w @4ohms.... Each of the outputs are rated at 8 ohms... ENJOY!!!

 

[Kac]

Re: What do I do to use my HRD like a head for a cabnet

I will definetly have to take a little closer look at the back of my amp...
thanks guys

-Kac