what other mods could i do with this?

[Pyro]

what other wiring options could i do with this? any ideas? iuse the 5 way like normal and i use the on on on switch to split the humbucker as an option. but i have room for other options. i was thinking of pararllel for the 2 coils in the HB. how would you do that with this setup?

sorry for the sloppy schematic, i did it on paint....

 

[theodie]

Re: what other mods could i do with this?

Install a push pull pot and wire it to the bridge pickup so when you pull it out it will activate the bridge pickup. In position 4 all three pickups will be on and in position 5 the neck and the bridge will be on. You could also replace one of the tone controls with an EMG EXG (mid boost) About how to wire the on-on-on switch http://www.seymourduncan.com/website/support/schematics/hum_1vol_series-split-par.html Wire the humbucker to the mini switch first then take the hot to the 5 way switch and the ground is still ground.