mnbaseball91
New member
I'm bringing in my Warmoth today. I need several things done:
1) File the nut slots to a 10" radius and widen a couple just a bit. The Warmoth cut nut is pretty attrocious. Plus, the slots are flat and the neck is a 10-16" radius.
2) File the bridge saddle slots to an 18.5" radius. The current saddle radius is 12" and I'm told it's hard to shim the saddles properly on this bridge (Gotoh 510).
3) Level one or two frets and do some minor fret dressing. They have virtually no wear and they're pretty good, but I want it to be perfect. Deffinatly does not need a whole fret job.
4) Check intonation, pickup height, ect. Set up everything to be tuned down 1/2 step.
How much should I expect to pay for this in the US?
1) File the nut slots to a 10" radius and widen a couple just a bit. The Warmoth cut nut is pretty attrocious. Plus, the slots are flat and the neck is a 10-16" radius.
2) File the bridge saddle slots to an 18.5" radius. The current saddle radius is 12" and I'm told it's hard to shim the saddles properly on this bridge (Gotoh 510).
3) Level one or two frets and do some minor fret dressing. They have virtually no wear and they're pretty good, but I want it to be perfect. Deffinatly does not need a whole fret job.
4) Check intonation, pickup height, ect. Set up everything to be tuned down 1/2 step.
How much should I expect to pay for this in the US?
