which single to go between two Seth Lovers

R

ratiug

New member
I'm installing pups in a HSH configuration using two Seth Lovers ,I am leaning towards the Five-Two Custom bridge as the middle pup. Like the SL's it has alnico II magnets, is medium output,the resistance is 6.9k to the SL bridge 8.1k, neck 7.6k.
the resonant peak is right between the two humbuckers. or should I go with the APDT-1 Twang banger which also has alnico II's and a resistance of 8.27k, which may be slightly hotter and match up volume wise with a humbucker,I am not concerned with R/W coils cause the SH-55's are single conductor and cant be split, what do you think?
 
Re: which single to go between two Seth Lovers

Or the Alnico II Pro flat. I bet that would blend well with them.
 
Re: which single to go between two Seth Lovers

I just found that the Custom Staggered ssl-5 has a higher output which should match up volume wise with a med output humbucker SH-55, I wont be doing anycoil splits so positions 2 + 4 will have both a single coil and humbucker on
 
Re: which single to go between two Seth Lovers

the twangbanger, 5/2, ssl5 and aps are great pups and i have them all. any of them will work but id go ssl6 if you are using 500k pots. the ssl6 is the ssl5 with flat poles.
 
You must log in or register to reply here.
Back
Top