which/where to get a blender pot

[greendy123]

Hi guys,

I'm interested in getting a blender for my strat, so I would have a vol, master tone, and the blender. Do you guys recommend any and where I could get it too? Oh is there anything the guitar tech needs to know to install it in my guitar?

Thanks
David

 

[That90'sGuy]

Re: which/where to get a blender pot

I know of two designers who make them: Torres Engineering and Lindy Fralin. I have the Torres blender in my Grosh and it works great (you really can't go wrong with either one).

Installation is a piece of cake. Take one lead and solder it where the hot of the neck is and one lead and solder where the hot of the bridge is and you're all set.

I believe Lew on this board sells the Lindy Fralin blender pots as I'm sure others here may as well.

 

[bert123]

Re: which/where to get a blender pot

I bought mine from LewGuitar thru his eBay store. I could not find it on his LewGutiar.com web site.

 

[FretFire]

Re: which/where to get a blender pot

You can also get them here:

Solid shaft: http://www.acmeguitarworks.com/250K-Solid-Shaft-Blender-CTS---250-Bushing-P29C14.aspx

Split shaft: http://www.acmeguitarworks.com/250K-Split-Shaft-Blender-CTS---250-Bushing-P32C14.aspx

 

[pac112]

Re: which/where to get a blender pot

Blender pot =

+

 

[mnbaseball91]

Re: which/where to get a blender pot

I know stewmac sells them but I don't know if the ones they sell are any good. Their 250k pots sound damn good to me though!

 

[greendy123]

Re: which/where to get a blender pot

Hey lew do you sell lindy fralin blender? Cause I didn't see any on your website. If you have any could I buy one from you?