Who's working on a build right now? Let's see your stuff!
- Thread starter CTN
- Start date
Peter Crossley
New member
Re: Who's working on a build right now? Let's see your stuff!
Thanks mate, a lot of very small bits in there...
Thanks mate, a lot of very small bits in there...
ChAoZ
Luthier Extraordinaire
Re: Who's working on a build right now? Let's see your stuff!
More like a re-build
Bought a Charvel acoustic off the net, arrived with the bridge lifting off
The bridge was glued on top of the finish, had to remove the finish under the bridge to allow wood on wood contact
Bought a bridge clamping contraption online and glued the bugger back on
All good now
More like a re-build
Bought a Charvel acoustic off the net, arrived with the bridge lifting off
The bridge was glued on top of the finish, had to remove the finish under the bridge to allow wood on wood contact
Bought a bridge clamping contraption online and glued the bugger back on
All good now
Last edited:
ChAoZ
Luthier Extraordinaire
Re: Who's working on a build right now? Let's see your stuff!
Bought second hand, thanks for the positive comment
Bought second hand, thanks for the positive comment
Ayrton
New member
Re: Who's working on a build right now? Let's see your stuff!
Edit the post, and go into the attachment manager. Select and delete. Just deleting it from the post text adds it back (as you see)
Edit the post, and go into the attachment manager. Select and delete. Just deleting it from the post text adds it back (as you see)
ChAoZ
Luthier Extraordinaire
Peter Crossley
New member
Re: Who's working on a build right now? Let's see your stuff!
YeRedHouseOverYonder
New member
Re: Who's working on a build right now? Let's see your stuff!
Stripped my '56 Les Paul Junior down to the wood. Sanded down to 220. I'm highly tempted to refin this myself.
Sent from my LM-V405 using Tapatalk
Stripped my '56 Les Paul Junior down to the wood. Sanded down to 220. I'm highly tempted to refin this myself.
Sent from my LM-V405 using Tapatalk
YeRedHouseOverYonder
New member
Re: Who's working on a build right now? Let's see your stuff!
Just picked up my Gibson GA 5 and got this gorgeous beast. It came out better than expected. Going to plug it in tomorrow \m/
Sent from my LM-V405 using Tapatalk
Just picked up my Gibson GA 5 and got this gorgeous beast. It came out better than expected. Going to plug it in tomorrow \m/
Sent from my LM-V405 using Tapatalk
Gtrjunior
New member
Re: Who's working on a build right now? Let's see your stuff!
I love that color!!
Just picked up my Gibson GA 5 and got this gorgeous beast. It came out better than expected. Going to plug it in tomorrow \m/
Sent from my LM-V405 using Tapatalk
I love that color!!
YeRedHouseOverYonder
New member
Re: Who's working on a build right now? Let's see your stuff!
Sent from my LM-V405 using Tapatalk
Thanks, the color is a lot more warm in person. It's hard to shoot. It looks more like this.
Sent from my LM-V405 using Tapatalk
YeRedHouseOverYonder
New member
Re: Who's working on a build right now? Let's see your stuff!
I adjusted a filter to show more of the color in person. It's a warm Trans Surf Green. I peeled off the plastic cover from the tort guard. She's even more stunning!
Sent from my LM-V405 using Tapatalk
I adjusted a filter to show more of the color in person. It's a warm Trans Surf Green. I peeled off the plastic cover from the tort guard. She's even more stunning!
Sent from my LM-V405 using Tapatalk
Last edited:
Peter Crossley
New member
Re: Who's working on a build right now? Let's see your stuff!
Holidays are over... Back to work..
funnily enough the colour and patterning on this guitar perfectly matches my dog... read of that what you may...
Holidays are over... Back to work..
funnily enough the colour and patterning on this guitar perfectly matches my dog... read of that what you may...
muttznmongrelz
New member
Re: Who's working on a build right now? Let's see your stuff!
Everybody Wants One! I know it's been done a million times...
Had the neck up for sale for about 2 1/2 weeks with minimal interest and was checking out bodies when the KNE popped up. Already have most of the rest of the parts for it so I figured...why not?
2018 USACG KNE Azusa “Frankenstein”: 2018 USACG Roasted Birdseye Maple Fretboard/Roasted Flame Maple Back, R3 1 11/16" Nut, 16" fretboard radius, 22 Jumbo 6100 frets, U shape back profile .84" - .91", Oil finish, Chrome Schaller Tuners/R3 Nut/String Retainer, 2018 KNE Azusa “Frankenstein” Striped 5lb 12oz Northern Ash Body, DiMarzio True Velvet Neck/Selector Switch/Vintage 80s Seymour Duncan JB TB-4J, DiMarzio 500k Push
ull Volume with “Tone” Knob to switch pickups & hidden Fender TBX Tone, Vintage 1985 Floyd Rose Original Chrome w/42mm BBB, Eye Bolt Strap Buttons
Everybody Wants One! I know it's been done a million times...
Had the neck up for sale for about 2 1/2 weeks with minimal interest and was checking out bodies when the KNE popped up. Already have most of the rest of the parts for it so I figured...why not? 2018 USACG KNE Azusa “Frankenstein”: 2018 USACG Roasted Birdseye Maple Fretboard/Roasted Flame Maple Back, R3 1 11/16" Nut, 16" fretboard radius, 22 Jumbo 6100 frets, U shape back profile .84" - .91", Oil finish, Chrome Schaller Tuners/R3 Nut/String Retainer, 2018 KNE Azusa “Frankenstein” Striped 5lb 12oz Northern Ash Body, DiMarzio True Velvet Neck/Selector Switch/Vintage 80s Seymour Duncan JB TB-4J, DiMarzio 500k Push
ull Volume with “Tone” Knob to switch pickups & hidden Fender TBX Tone, Vintage 1985 Floyd Rose Original Chrome w/42mm BBB, Eye Bolt Strap Buttons
Last edited:
