dalaylama1234
New member
i recently bought an antiquity 2 surfer custpm bridge pickup for my highway1 strat. Does anyone know whick cable is soldered(black or white)?
wiring antiquity custom bridge
- Thread starter dalaylama1234
- Start date
RLee
New member
Re: wiring antiquity custom bridge
If you're putting a duncan pickup in with Fender pickups, it's possible that you need to reverse the wires (white to ground and black to switch) to put it in phase with the middle pickup. If it ends up out of phase, your middle/bridge combo sound will be really thin-sounding.
Here's an article on how to tell if your pickups are phased correctly:
Pickup-phasing-faq
If you're putting a duncan pickup in with Fender pickups, it's possible that you need to reverse the wires (white to ground and black to switch) to put it in phase with the middle pickup. If it ends up out of phase, your middle/bridge combo sound will be really thin-sounding.
Here's an article on how to tell if your pickups are phased correctly:
Pickup-phasing-faq
