Wiring Classic Stack, SSL5n, Classic Stack

thor666

New member
I've finished wiring my Fender strat with two stacked hums on neck and bridge, and a Custom Staggered (neck) on the middle. I notice there's hum on the 2nd and 4th position though...

Is there any way I can remove the hum? the Custom staggered comes with only 2 wires, white and black.
 
Re: Wiring Classic Stack, SSL5n, Classic Stack

Hey Thor, the answer is a qualified maybe.

The problem is that I don't know the wind directions or polaritys for the pickups in question and I don't know if you can use either of the coils in the Classic Stacks.

This would be question better asked directly to the folks at Seymour Duncan. Scott Miller or MJ can probably help you out.
 
Back
Top