Wiring diagram for P90-S-P90 configuration?

[DrKirkMiamiU]

Doing a new guitar build, and have a HSH body that I'd like to install P90-single coil-P90 (both P90s are humbucker sized). I can't find a wiring diagram that shows how to do it. I'm going to try to figure it out by studying other diagrams, but if one exists out there I'd love to get my hands on it. Anyone seen this before? Is it impossible for whatever reason? Is it just like an S-S-S? Thanks for your help.

 

[AlexR]

Re: Wiring diagram for P90-S-P90 configuration?

Well if the p90's are vintage type 2 conductor, you have essentially a s-s-s strat wiring setup.
The only complication really in that scenario is making sure the braid is well pulled back from the hot.

 

[GuitarDoc]

Re: Wiring diagram for P90-S-P90 configuration?

A P-90 IS a single coil pup. So you will have a s-s-s set up.
You haven't said what type of switch you have or what switching options you want or what tone shaping options you want (1 or 2 tone controls). So here is a very basic diagram with 1 vol and 1 tone:

https://docs.google.com/gview?embed...om/wp-content/uploads/2016/05/3S_5W_1V_1T.pdf

Here's one with 2 tone controls and a p/p switch which allows you to add the bridge pup with any other switch combination (ie: bridge + neck, bridge + middle + neck).

https://docs.google.com/gview?embed...-content/uploads/2016/05/3S_5W_1VppENB_2T.pdf

 

[Zhangliqun]

Re: Wiring diagram for P90-S-P90 configuration?

Does the guitar have a blade switch? And if yes, do you have any reason to NOT wire it up just like a Strat?