wiring guru's: I need some help please

[orpheo]

Dear all,

this morning I woke up with a crazy idea and I have no idea if this is possible. Some of you all are so much better in designing schematics than I am, I turn to you.

I have two single coils that I want to control via two push pull pots.

With push pull pot 1 I can select one or the other. This is easy.

With push pull pot 2, I want to select both in series. so in the up position, it's both in series, in the down position it's one coil or the other. Seymour Duncan has a schematic for prails with 2 push pull pots but there's a little hickup in that wiring. I want one single coil on (for example, the p90 side in the prail wiring) when both pots are down, select the other single coil when one is up and series when both are up. I just can't figure it out for the love of me.

Here's the duncan wiring I'm referring to.

If someone could help me out please?

 

[orpheo]

Re: wiring guru's: I need some help please

another issue I have with the wiring I just posted is that I have to pull one pot for one coil and the other pot for the other coil. I want that to be one pot, and the other for series.

I have to admit, folks, I would appreciate to forgo the (almost inevitable) discussion about how 2 singlecoils don't sound well in series. These do, I had them in another guitar with a 4 way rotary to get the tones I want but I transplanted them in another guitar and the rotary isn't an option now.

 

[Artie]

Re: wiring guru's: I need some help please

Gimme a sec. This is one of my favorite 2-single diagrams. I just gotta round her up. (Just got my 1st coffee.)

 

[orpheo]

Re: wiring guru's: I need some help please

Artietoo, I'd be much obliged I just couldn't figure it out.