hello would the following be possible
1 vol, 1 tone 3way switch, 2 push/pulls
pickups are, Sh1n-4c neck, Tb-4 bridge, 99% sure they are the stock ones
Guitar is a Jackson SL2H from 2000
i would want this switching as from the p-rails diagram #2
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2_prails_1v_1t_tspp
i checked a few old threads about the subject and it seems there is some different opinions on whether
this would work with normal duncan pickups instead of the P-rails, also was some talk about bugs in the diagram.
Sorry if this might have been asked before, but i would really want to hear from the wiring gurus here
on the forum before i put my soldering iron to work
1 vol, 1 tone 3way switch, 2 push/pulls
pickups are, Sh1n-4c neck, Tb-4 bridge, 99% sure they are the stock ones
Guitar is a Jackson SL2H from 2000
i would want this switching as from the p-rails diagram #2
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2_prails_1v_1t_tspp
i checked a few old threads about the subject and it seems there is some different opinions on whether
this would work with normal duncan pickups instead of the P-rails, also was some talk about bugs in the diagram.
Sorry if this might have been asked before, but i would really want to hear from the wiring gurus here
on the forum before i put my soldering iron to work
