Wiring help

[bluesman001]

I am trying to replace the pickups in my 7 from stock Ibanez to Seymour Duncan JB/59 set. I have a 2000 MIJ Ibanez RG7421. The wiring diagram for Ibanez is here:
http://i6.photobucket.com/albums/y249/bluesman001/w00rg7420.gif
And here is SD wiring:
http://i6.photobucket.com/albums/y249/bluesman001/2hum_1vol_1tone_super5way.jpg
Obviously SD's wiring for the 5 way switch is funky. Can anyone help me figure out how to wire the SD's with coil tapping into my 7? Thanks

Here are pics of my 7421 controls:
http://i6.photobucket.com/albums/y249/bluesman001/photo.jpg
The loose red and white wires are from the stock bridge pickup (removed).
http://i6.photobucket.com/albums/y249/bluesman001/photo2.jpg


What I'd like to achieve would be similar to strat config:

Starting from the bridge (I call this pos 1)

1) Full bridge hum
2) Coil Tapped Bridge (single coil)
3) Full bridge and neck hum
4) Coil Tapped neck (single coil)
5) Full neck hum