Wiring help

[925SS]

I'm going to convert my partscaster from sss to 2 HBs.
The switch is Asian, all poles in a line.
What I'd like to do is this.

1=Neck
2=neck split
3=neck & bridge
4=neck & bridge split to make a HB, north bridge/south neck, or opposite
5=Bridge

All the diagrams I find, the switch has poles on both sides.:eyecrazy:
If this is covered somewhere, I'd appreciate a link.

Thanks in advance

 

[Artie]

Re: Wiring help

You won't be able to do that with standard 5-way, be it Asian or American. You'll need a Superswitch.

 

[925SS]

Re: Wiring help

You won't be able to do that with standard 5-way, be it Asian or American. You'll need a Superswitch.

I was afraid of that, I was just in the wiring library, checking my options, which lead me to what you just pointed out, thanks for the reply.
I may have to settle for other options, for the moment

 

[925SS]

Re: Wiring help

Probably gonna go with this http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2hb_1vol_1tone_5way

Position 5 is bridge split by itself, is there a way to have the neck split by itself, instead
IE: switch the position of the split wires, making pos 4 neck with bridge split & pos 5 neck split?