wiring help

D

dlc1953

New member
Can't find this combo in support///Strat/L59(with push-pull) neck//52 in middle///JB(full size) bridge//1vol/2 Tone/5 way/and the 1push-pull volume????????????????
 
Re: wiring help

dlc1953 said:
Can't find this combo in support///Strat/L59(with push-pull) neck//52 in middle///JB(full size) bridge//1vol/2 Tone/5 way/and the 1push-pull volume????????????????
Click to expand...

and i have absolutely no idea what you are asking..#1.. too many slashes.. #2.. just tell us what your end goal is like what you expect a push/pull to do #3.. why so many question marks. you come across as impatient.. LOL

just tell me what the end goal your are trying to achieve and ill draw something up .. but you gotta be clear.. all the slashes/question marks just annoy me.. just saying
 
Re: wiring help

The wiring diagram for the configuration I stated. Just one push pull that is the volume. Have it that way now but putting new pickups in. Nothing meant by the slashes or ????? just can't find the diagram.Thanks
 
Re: wiring help

What do you want the push pull to do? We can’t help until we know all the variables. A push pull can be used for different things such as a coil split, a series parallel, phase switching, as an on/off for a neck pickup, coil tapping. Tell us what you’re looking for this could split to do.
 
Re: wiring help

BUT what do you wish the push/pull to do.. im taking its a H/S/S..split coil for the lil '59

as I said you arnt making yourself clear.. there are several things a DPDT switch can be used for with a 4 conductor 'pup..
 
Re: wiring help

The way the Tech wired it now is for the Bridge (JB) to split when in up position, I also want to be able to split the new Little 59.
 
Re: wiring help

dlc1953 said:
The way the Tech wired it now is for the Bridge (JB) to split when in up position, I also want to be able to split the new Little 59.
Click to expand...

if its already wired up except for making lil 59 split .. only takes one or two solder connections to make it do what want..

This is information that would of been helpful from the start.. seriously dude. was under the impression that you was wiring it up from scratch..

I cant read your mind




well.. im done.. ill add a bit of color and upload it
 
Re: wiring help

this isnt the original drawing i drew up as I thought you was wiring it up from scratch (takes time to color) but if its already wired up except for the lil 59 split..




just do this.. w/o knowing exactly how the tech wired it up.. im guessing that he only used one side of the switch.. just use the other side for the lil '59


the red and white thast are normally soldered and heat shrunk together.. take off the heat shrink/tape and wire the red/white to the middle lug.. All you are doing when you split a humbucker is that you are grounding one coil out
 
Last edited:
You must log in or register to reply here.
Back
Top