Wiring help

[NoOnesFang13]

I am having an issue making a diagram and have been at it for a couple hours. The setup I want is for a p-rails neck and a humbucker bridge. Vol-tone-tone, 1 push pull, and a 5 way super switch.
1. P-Rails full (P-90 push-pull)
2. P-Rails Parallel (Rail push-pull)
3. Inner Coils
4. Both Pickups Full
5. Bridge Full

 

[BriGuy1968]

Re: Wiring help

I am having an issue making a diagram and have been at it for a couple hours. The setup I want is for a p-rails neck and a humbucker bridge. Vol-tone-tone, 1 push pull, and a 5 way super switch.
1.P-Rails full (P-90 push-pull)
2.P-Rails Parallel (Rail push-pull)
3.Inner Coils
4.Both Pickups Full
5.Bridge Full

Cool idea!

I decided that I felt like attacking it since I had some time tonight, and came up with something that I think will work well for you:

The only things different from your request are:

1) I tend to think of the switch positions in the reverse of how you had them, thus the switch in my program is numbered that way. So #1 is Bridge Full and #5 is Neck Full.

2) I added an option for using the push/pull in position 2 (your position 4). As it's set up, the push/pull does exactly what you asked for in positions 5&4 (your 1&2) and it does nothing in positions 1&3 (your 5&3). In position 2 (4), however, I was faced with the P-Rail being "off" if the switch was pulled. This would have duplicated position 1 (5), so I opted for having it split the P-Rail to the P-90 (the rail would have required a re-work of the whole diagram, plus the P-90 alone would be closer to being balanced with the humbucker in the bridge).

I hope it works well for you, and good luck with your project! Let me know how it turns out! [emoji41]


Sent from my iPhone using Tapatalk

 

[NoOnesFang13]

Re: Wiring help

Thanks for the hard work man, I cant see the picture at work unfortunately so ill check it when I get home. I found the P-Rails sitting in one of my cases and remembered someone had given it to me since they ordered their body with a P-90 rout instead of a humbucker. Thanks again