Wiring Nightmare Tonight, Need Help!

[jericho guitars]

Midnight bender to make something happen!

Specs:

2 humbucker - 4 conductor
1 volume with push/pull
2-Way ON/ON Jaguar looking switch : (the small one)(http://www.stewmac.com/Pickups_and_...arts/Switches/Switchcraft_Slide_Switches.html)

volume should select both humbuck and then in pull position to be coil split
2 way ON/ON Jaguar looking switch does nothing but switch the pickups from Bridge to Neck, changing nothing else.

I cannot find this diagram ANYWHERE,

Can someone please help?

Thank you

dave@jerichoguitars.com

or reply is just fine thank you so much.

 

[beaubrummels]

Re: Wiring Nightmare Tonight, Need Help!

Just use this and replace the 3-way with your 2-way.

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_3w_pp

 

[jericho guitars]

Re: Wiring Nightmare Tonight, Need Help!

Hey thanks!

How do i replace the 3 way with the 2 way? what wires go to what connectors? there are 6 leads on the ON/ON switch 2 way?

 

[beaubrummels]

Re: Wiring Nightmare Tonight, Need Help!

Just use 3 lugs on only one side of the switch. Use the center as the wire to the output jack and the outside lugs one for each pickup just like the diagram.