wiring question concerning bridge humbucker, micro 3 way switch, in a strat

[semi-hollowbody2018]

Adding a SD classic 59 to my strat bridge, and a 3 way micro switch to the pickguard for series parallel split...i downloaded SD wiring diagram for 1 humbucker 1 volume 1 3 way micro switch, just to see how the micro is wired...i assume that the hot lead going from the switch to the volume pot in this diagram, in my master volume strat, would go to the lever switch bridge pup lug...correct?? does my question make sense?

 

[Mincer]

Is your 59 a 4 conductor version? And what are the other 2 pickups? SD's pickups are out-of-phase to modern Fender pickups, so this would influence how it is wired.

 

[semi-hollowbody2018]

Is your 59 a 4 conductor version? And what are the other 2 pickups? SD's pickups are out-of-phase to modern Fender pickups, so this would influence how it is wired.

yes its a 4 conductor so I have the wires needed to wire the switch
the other 2 pickups are sd little 59's

 

[Spaghetti Bolo]

Adding a SD classic 59 to my strat bridge, and a 3 way micro switch to the pickguard for series parallel split...i downloaded SD wiring diagram for 1 humbucker 1 volume 1 3 way micro switch, just to see how the micro is wired...i assume that the hot lead going from the switch to the volume pot in this diagram, in my master volume strat, would go to the lever switch bridge pup lug...correct?? does my question make sense?

You are correct.

 

[eclecticsynergy]

Yep, hot from the mini toggle goes to bridge pickup's usual lug on the blade switch.

 

[semi-hollowbody2018]

excellent, thats what I ASSumed but wanted to make sure before i start flinging solder everywhere LOL...thanks for the tips...