Wiring Question

[iamthesuck]

I'm trying to wire a 2 Humbucker 1 volume, 2 tone with coil splitting on one of the tone knobs. I'm not sure how these knobs work, so I'm not sure which pins do what. I only want one pickup coil split. Does anyone have any wiring diagrams that would work for a situation like this?

Setup is Pickups>tone knobs>switch>volume>out

 

[BriGuy1968]

Re: Wiring Question

Try here... it appears to be exactly what you're looking for. The only difference is that the push/pull switch will be on one of your tones instead of on the volume. Everything else will remain the same.

Good luck!

 

[GuitarDoc]

Re: Wiring Question

Try here... it appears to be exactly what you're looking for. The only difference is that the push/pull switch will be on one of your tones instead of on the volume. Everything else will remain the same.

Good luck!

Of course that diagram splits both pups. Only attach the red and white wires of the one pup which you want to split. And for convenience, use the push/pull pot for the tone control of the pup you want to split.

 

[BriGuy1968]

Re: Wiring Question

Of course that diagram splits both pups. Only attach the red and white wires of the one pup which you want to split. And for convenience, use the push/pull pot for the tone control of the pup you want to split.

Good catch!


[emoji450]Sent from my iPhone using Tapatalk [emoji441]