Wiring Superswitch, Help Artie...Lew

[bungalowbill]

I'm trying to wire up my Strat with a double wafer superswitch to get these pup combinations:

1-bridge
2-bridge/middle
3-bridge/neck
4-middle/neck
5-neck
I would also, if possible, like the 1st tone control for the neck and the 2nd tone for the bridge. here is the diagram I used to wire it and all that is working is the neck pup.
https://forum.seymourduncan.com/attachment.php?attachmentid=3231

Any help would be appreciated...I've never wired up a superswitch before. Thanks.......Joe

 

[Artie]

Re: Wiring Superswitch, Help Artie...Lew

Hmmm . . . there's something wrong with your link. It just takes me to a logon screen, when I'm already logged on.

See if you can repost that.

 

[greendy123]

Re: Wiring Superswitch, Help Artie...Lew

You should try getting a blender if you haven't gotten the switch yet. It allows to do all your positions and one more setting of all three pickups at the same time.

 

[bungalowbill]

Re: Wiring Superswitch, Help Artie...Lew

Lets try this

 

[Artie]

Re: Wiring Superswitch, Help Artie...Lew

That diagram is correct, so just double-check your wiring. Does this help at all?

(Pic deleted to save bandwidth.)

Edit: Make sure you included that top jumper that connects the two "common" terminals together. The bold black line in my diagram.

 

[bungalowbill]

Re: Wiring Superswitch, Help Artie...Lew

Thanks Artie .....I'll check it out I probably made a mistake somewhere.

 

[bungalowbill]

Re: Wiring Superswitch, Help Artie...Lew

Thanks Again...had one wire on the wrong lug :smack: :smack: :smack:

Love that neck & bridge together, sounds like a real good Tele. :dance:

 

[Artie]

Re: Wiring Superswitch, Help Artie...Lew

Cool. Glad you got it working. I'm gonna delete that pic then, to save bandwidth.