Wiring the AHB-2 Jumper to Push-pull

[stuntmedia]

I just received an AHB-2 Blackouts bridge humbucker, with the intention of wiring it to a push/pull pot, as it says on the Duncan website product description. However, I am unable to find a wiring diagram of this mod, and it is not clear from looking at the pickup, either. Has anyone done this mod, or know how it would be accomplished. I have the necessary 25k push/pull pot, and I'm ready to roll, I'm just not clear on how to do it. Any help would be appreciated.

Thanks,
PW

 

[mustaine-who?]

Re: Wiring the AHB-2 Jumper to Push-pull

I wired mine to a mini-switch...

 

[stuntmedia]

Re: Wiring the AHB-2 Jumper to Push-pull

How is is physically wired? Where are your connections?

 

[xntrick]

Re: Wiring the AHB-2 Jumper to Push-pull

i also had mine wired to a mini switch, i used a connector from an old fan assembly i had lying around...

 

[stuntmedia]

Re: Wiring the AHB-2 Jumper to Push-pull

Not to offend either one of you guys who were kind enough to reply, In fact, thanks very much, but this isn't giving me much to go on. Mini-switch or push/pull, what am I connecting to on the pickup? Where does the funky plastic jumper go? I wish, if Duncan is going to say that this is an option, that they would post a diagram on their site, or ship it with the pickup.

 

[xntrick]

Re: Wiring the AHB-2 Jumper to Push-pull

the jumper goes on the the 2 pins underneath the pickup..the switch and harness can be seen in this photo on the left hand side:

 

[Deadblue]

Re: Wiring the AHB-2 Jumper to Push-pull

the best way/tool to know where to put your wire on the push/pull pot from where there is the jumper to the pot its with a multimeter in ohm. (remove the jumper before)
chek on your pot if there is link 0.000ohm when the pot is push.
if yes then solder your wire on this if not the multimeter will mark "overload" so try another one....etc if the multimeter mark 0.000ohm this is like you have the jumper on it and if you pull then the multimeter will mark "overload" now its like you have removed the jumper !!!