wiring with VLX91 switch

[sasop]

Hello,

I've got an Ibanez RG2027 (7 string) sometime ago and its wiring was a mess. So I bought SH-1 '59 for bridge and SH-2 jazz for neck position. Now I'm having great difficulties wiring the whole thing in combination with 5-way OTAX VLX91 switch. I'd like to have the following setup:
1. Bridge humbucker
2. Bridge splitted
3. Both humbuckers
4. Neck Splitted
5. Nech Humbucker

Could anyone help me out?

 

[erikm5150]

Re: wiring with VLX91 switch

i suggest going to ibanez.com and getting their wiring schem.
or go to jemsite and ask around there.

if you have trouble finding the diagrams on the ibanez site, PM me and i can email them to you -- i still have some saved.

i have used the VLX91 OTAX switch -- it's a complicated, specialized 4-pole 5-way superswitch.

 

[sasop]

Re: wiring with VLX91 switch

I was looking for the scheme on ibanez.com but unfortunately there in no scheme for rg2027. There are some similiar that also use VLX91 but could not find one that works for me.

 

[erikm5150]

Re: wiring with VLX91 switch

those ibanez schems should work, as long as you have the same pickup config... H-H, i assume...

remember, the wire colors are different for dimarzio/ibanez and for duncan.
for more info, look here:
http://guitarelectronics.com/category/wiringresources.11pickupcolorcodes/

 

[Crazy_Guitar]

Re: wiring with VLX91 switch

Try the diagrams on www.dimarzio.com or www.seymourduncan.com.

 

[jammertom]

Re: wiring with VLX91 switch

I'm going to try this on my MIM HH (Custom + '59):

http://www.stewmac.com/shop/Electronics,_pickups/Components:_Switches_and_knobs/2/Megaswitches.html