WTB Seymour Duncan Trembucker cover unplated/raw nickel

[ragamuffin]

Probably a long shot, but I'm looking to buy a SD Trembucker cover in unplated/raw nickel to match my neck pickup. The Custom Shop normally offers them, but I recently contacted them to buy one and they said they were out of stock and don't know when they'll have them back due to supply issues. If anyone has an extra one I'd love to buy it!

 

[hamerfan]

https://www.philadelphialuthiertool...ckup-cover-non-plated-raw-nickel-silver-53mm/

 

[ragamuffin]

https://www.philadelphialuthiertools...l-silver-53mm/

Do you know if they fit? I thought I'd read somewhere that SD trembuckers have slightly wider bobbins that don't fit in a standard f-spaced cover.

 

[hamerfan]

The string spread on such guitars is slightly wider than that of guitars Tune-o-matic or similar bridges. On standard humbuckers, the bobbins typically measure 2.695 inches, while “trembuckers” typically measure 2.780 inches.

 

[ragamuffin]

The string spread on such guitars is slightly wider than that of guitars Tune-o-matic or similar bridges. On standard humbuckers, the bobbins typically measure 2.695 inches, while “trembuckers” typically measure 2.780 inches.

The product description on Philadelphia Luthier says the cover is only 2.75" wide

 

[hamerfan]

May someone can chime in, who actually tried it. Maybe you have to post the question on the Forum.

 

[ragamuffin]

May someone can chime in, who actually tried it. Maybe you have to post the question on the Forum.

That's a good idea, thanks