WTT: Full Shred bridge (SH-10b) or Gibson 500T for Screamin Demon or PATB-1n

[Monsta-Tone]

I have a couple of pickups that I don't really need and I need a couple of pickups......
I have:
Full Shred Bridge model (SH-10b) - black, decent but used condition, about 9" of lead
Gibson 500T (I think, might be a 498) - black, very good condition about 6" of lead
Epiphone bridge pickup - black, from Gothic Flying V, ceramic, sounds pretty good
Duncan Cool Rails - white, older style, faded yellow-ish white, measures 9.8k, about 9" of lead

I'm looking for:
PATB-1b
PATB-1n
PATB-2
PATB-3
Screamin Demon (SH not TB)
Custom 5 TB
PAF Pro (neck)
Liquifire
Hot Rails (neck)
Open to other suggestions

Basically, I need:
neck pickup for PRS McCarty (medium to high output with great clarity, don't want a Jazz)
neck pickup for older Ibanez (rails or stack - must be a screamer)

Email is andy at amps-tubes dot com
Cell is 808-633 three nine four four
I live in Hawaii, but USPS Flat Rate Box prices apply. It's under $6 to ship a pickup to and from here.
I am only interested in pickups from North America. Shipping to or from Europe/Asia would probably cost too much.

 

[DonP]

Re: WTT: Full Shred bridge (SH-10b) or Gibson 500T for Screamin Demon or PATB-1n

Have you tried your Full Shred in the neck?

 

[Monsta-Tone]

Re: WTT: Full Shred bridge (SH-10b) or Gibson 500T for Screamin Demon or PATB-1n

It's in the neck of my ESP MH1000 right now. I'll give it a good spin and see if I like it.

I just picked up a few more pickups in a trade deal.
PRS HFS humbucker - decent lead length 9" or so, fairly scratched up
PRS Vintage Bass humbucker - decent lead length, about 9" and fairly scratched up
Duncan Alnico Pro II Trembucker (bridge)