Your Signature Guitar - Specs?

[Karloff]

I'll take a Gibson ES-335, little shy of a 50's neck, ebony fretboard, trapezoid inlays, Grover tuners, Classic 57 pickups, cream binding, binding around the headstock, flame maple top, Honeyburst finish, medium jumbo frets, top hat knobs.
almost the guitar I'm playing in my avatar.

 

[Cynical]

My absolute favorite guitar is my Kiesel Ultra-V, and my favorite neck ever is on my friend's Jackson RR1, so my spec is based on combining what I like about those with some tweaks:

Pointy Symmetrical V shape (think Jackson King V)
Neck through body, maple neck, maple wings, flamed maple top, ebony fretboard, jumbo frets, 12-16" compound radius, thin C profile (ideally very similar to the Jackson Soloist/Randy Rhoads profile), 25" scale length
M22SD/M22V pickups (yes, I know they're discontinued, but I'm assuming no limits here), 1 volume, 1 tone, push/pull coil split on the tone knob
Locking tuners, Hipshot fixed bridge. Gloss transparent red finish on the body and headstock, clear satin on the back of the neck.

 

[PS412]

Not to sure.
No single coils, probably made of some sort of metal, at least partially. Fretless, I don't have one of those.
I'm easy.

 

[Guest]

Gibson Les Paul
Mahogany Body Maple Cap
Double Ring Kluson Tuners
Stainless Frets
60's Slim Taper Neck
60's Spec Headstock
Aged Ivory Binding, Pickup Rings, Poker Chip
59 Truss Rod Cover
Seymour Antiquities Stock
Vintage Spec wiring with Bumble Bee Caps
Gold Top hats w/Indicators
ABR-1 Bridge
Aged Hardware
Choice of Gold Top or Lemon Drop finish
Plain Top only
Stamped Serial Numbers
Murphy Lab Medium Relicing
Aged Deluxe Case w/Blanket

Limited to 100 of Each Color
Comes with Silver Peso Guitar Pick, Bottle Neck Slide
Strung with Dunlop Rev. Willy's Mexican Lottery Brand Strings
No weight relief.

 

[Guest]

Spaghetti Bolo

Well the idea is to design "your" signature guitar. I like Les Pauls, some like Strats, you like what you like. No wrong choice really. I like your concept though. It would be a VERY pricey guitar. Would it be neck through?

 

[Clint 55]

 

[Mincer]

I'd absolutely need 2 humbuckers and 22 frets. Most likely scalloped stainless frets. Purty wood.

 

[JamesPaul]

I want mine to be a Gibson, Cobalt Burst, Johnny A Signature model with a Bigsby! Pickups TBD but I am leaning towards SH-1 '59s and add Triple Shot rings. Everything else stock.

If it is based on what I have played the most, they would examine my '96 Epiphone Les Paul Classic and reproduce it. It would have a double black SH-5 Custom and SH-2n Jazz set as that is what I initially installed in it, unless covered double crème becomes an option once again. If the latter, the bridge would change to a TB-5 Custom. Again I would add Triple Shot rings for more tonal variety. Finish options would be Heritage Cherry, Tobacco, Trans Amber Bursts and Gold, Goldtop, Black solid which are the colors of all my Les Pauls.

 

[Aceman]

Les Paul Standard / Cherry Sunburst, AKA: #1

3 piece Maple Neck
High ratio Gotoh tuners
Duncan Distortion
SD Custom Shop T-Top Neck
500k pots / 50's wiring

Now, the Steve Dallas Sig model is a bit different....

Dean Cadillac / Faded Denim - Matching Headstock
Chrome hardware
Lightly Flamed Maple Neck
Highly flamed Maple Cap
Mahogany Body
Grovers
Abolony Logo & Square Inlays
Duncan Pearly Gates and Custom
Tapped - Push/Pull Tones
500k Pots
Khaler

 

[Kac]

This is the one I put together. For my custom shop guitar I would certainly keep the rosewood neck and the locking tuners. (Deep C neck profile, 9.5 inch radius, 22 narrow tall frets, bone nut) I would want to try an EVH 78 in there to see if I liked it more or less than the pearly gates.
Maybe a more unique green color for my custom model as well. Thanks

Changed out the Pearly Gates to the custom shop EVH ‘78 Trembucker. Confirmed the ‘78 is my favorite pickup of all time.

 

[chadd]

I can start by revising my favorite guitars.

1. Gibson R7 gold top custom shop but with Slash pickups and SS jumbo frets.

I love my R7 with the Slash set, but it's a burst. Definitely plan to do stainless when it comes time for a refret

 

[weepingminotaur]

Don't really have a signature guitar per se but if I could design one, I'd go for a neck-through, 24-fret Les Paul-shape HSS with a Fender scale because I never see that combination of body shape, neck construction, fret #, scale, and electronics and I would buy the heck out of it if it were available.