What's your standard on/off, true bypassing stomp switch actually called in proper electronics terms? Thanks.
Announcement
Collapse
No announcement yet.
Noob pedal building question
Collapse
X
-
Please visit and share my guitar gear & DIY Blog
WWW.BACKLINE.TK
Non Biased General Guitar forum
http://fret.boards.net
-
Re: Noob pedal building question
Most footswitches are DPDT, but a 3PDT will also do the job. You can use the "extra" pole for disconecting the battery when it's off (if you don't mind a slight "pop".Originally Posted by IanBallard
Rule of thumb... the more pot you have, the better your tone.
Comment
-
Re: Noob pedal building question
I think you can just wire the LED in series when the switch is on so that you don't need the extra pole just for the LED.Originally Posted by IanBallard
Rule of thumb... the more pot you have, the better your tone.
Comment
-
Re: Noob pedal building question
Originally posted by GuitarDoc View PostI think you can just wire the LED in series when the switch is on so that you don't need the extra pole just for the LED.Band: www.colouredanimal.com
Twitter: www.twitter.com/mrperki
Blorg: mrperki.tumblr.com
Read my Seymour Duncan blog posts
Comment
Comment