I have seen a lot of talk about UOA5, but what about UOA2?
Announcement
Collapse
No announcement yet.
Unoriented A2?
Collapse
X
-
Re: Unoriented A2?
Ok, let me ask a dumb question. What is unoriented??Believe me when I say that some of the most amazing music in history was made on equipment that's not as good as what you own right now.
Jol Dantzig
Comment
-
Re: Unoriented A2?
I asked the same thing a while back because I didn't know.
"Believe the word, I will unlock my door and pass the cemetery gates"
Comment
-
Re: Unoriented A2?
It should be more correct call'em Isotropic and Anisotropic.
Isotropic: no predetermined magnetic orientation in the annealing process.
Anisotropic: magnetic orientation of the grain determined in the annealing process.
The predetermined magnetic orientation allows the alloy to be charged with a higher magnetic charge more stably room it and preserve it.
HTH,
Comment
-
Re: Unoriented A2?
Some good info in both of these. Thanks.
Originally posted by Dr.K View PostI asked the same thing a while back because I didn't know.
https://forum.seymourduncan.com/showthread.php?t=214389Originally posted by LtKojak View PostIt should be more correct call'em Isotropic and Anisotropic.
Isotropic: no predetermined magnetic orientation in the annealing process.
Anisotropic: magnetic orientation of the grain determined in the annealing process.
The predetermined magnetic orientation allows the alloy to be charged with a higher magnetic charge more stably room it and preserve it.
HTH,
Comment
-
Re: Unoriented A2?
A2, A3, and A4 are normally unoriented. You can get them polished or roughcast.
A5's are almost always polished and oriented, but Addiction FX carries roughcast and unoriented."Completely Conceded Glowing Expert."
"And Blueman, I am pretty sure you've pissed off a lot of people."
"Wait, I know! Blueman and Lew can arm wrestle, and the winner gets to decide if 250K pots sound good or not."
Comment
-
Re: Unoriented A2?
Originally posted by blueman335 View PostA2, A3, and A4 are normally unoriented. You can get them polished or roughcast.
A5's are almost always polished and oriented, but Addiction FX carries roughcast and unoriented.
Comment
-
Re: Unoriented A2?
Originally posted by UberMetalDood View PostThanks. I found an A2 & A5 roughcast, unoriented combo for like $7.00. What do you think about A4 for bridge pickups? How might that change say a Full Shred or JB?"Completely Conceded Glowing Expert."
"And Blueman, I am pretty sure you've pissed off a lot of people."
"Wait, I know! Blueman and Lew can arm wrestle, and the winner gets to decide if 250K pots sound good or not."
Comment
-
Re: Unoriented A2?
I run reg A4 mags in some of my neck 59s when the low is too overwhelming..Believe me when I say that some of the most amazing music in history was made on equipment that's not as good as what you own right now.
Jol Dantzig
Comment
-
Re: Unoriented A2?
Originally posted by blueman335 View PostThey have a balanced EQ, so you won't get a big dose of mids or treble, like other alnicos. Some players like that, others don't. In the bridge slot, I prefer roughcast A4's; a little smoother high end. There hasn't been as much done with A4's, as with some of the other magents, but it has it fans, in the bridge and neck both. There are guys here with C4's and JB4's that swear by them, as well as '59N's with A4's.
Originally posted by BloodRose View PostI run reg A4 mags in some of my neck 59s when the low is too overwhelming..
Comment
-
Re: Unoriented A2?
Originally posted by UberMetalDood View PostA smoother high end and more balanced eq sounds good. I wonder how a mid dipped pickup like the C5 would sound with an A4. If it balances out the mids and treble of a JB then would it compensate for mids and reduce bass in a C5?
What magnet works best in a Custom, JB, or any other HB depends on your tastes and how bright your wood and amp are. As they say: "individual results may vary.""Completely Conceded Glowing Expert."
"And Blueman, I am pretty sure you've pissed off a lot of people."
"Wait, I know! Blueman and Lew can arm wrestle, and the winner gets to decide if 250K pots sound good or not."
Comment
-
Re: Unoriented A2?
Originally posted by blueman335 View PostThe C5 is 'mid-dipped' from the A5 magnet, just like a CC is mid-heavy from the A2. The PU just responds to the magnet. C4's are worth a try.
What magnet works best in a Custom, JB, or any other HB depends on your tastes and how bright your wood and amp are. As they say: "individual results may vary."
Comment
Comment