Jackson Floyd Nuts

[Warheart]

Hi, i was just wondering if anyone knew the model number of Jackson Floyd nuts? I've only ever seen the R2 or R4 for sale, but they differ in width. I'm looking for a nut thats 1 11/16ths wide, but also, with a lower height, as the R4 is too high (its .275", and i need a .225")? I think i need an R8, but i don't even know where to get it.
does anybody else know what i'm talking about?

Floyd Rose II and Floyd Rose Original
#1 Nut Assembly
Narrow nut. Width: 1-9/16"; Height: .225"; Spacing: 1.30; Radius: 10". 39.7mm/1.30mm/.225mm

#2 Nut Assembly
Average Vintage Stratocaster width. Width: 1-5/8"; Height: .225"; Spacing: 1.37; Radius: 10". 41.3mm / 1.37mm / .225mm

#3 Nut Assembly
Wide nut, narrow spacing for binding. Width: 1-11/16"; Height: .275"; Spacing: 1.40; Radius: 10". 42.9mm / 1.40mm / .275mm

#4 Nut Assembly
Wide width, wide spacing. Width: 1-11/16"; Height: .275"; Spacing: 1.43; Radius: 10". 42.9mm / 1.43mm/ .275mm

#5 Nut Assembly
Extremely wide. Width: 1-3/4"; Height: .275"; Spacing: 1.50; Radius: 10". 44.5mm / 1.50mm / .275mm

#6 Nut Assembly
Same as Nut #1, but with bullet nut relief. Width: 1-9/16"; Height: .225"; Spacing: 1.30; Radius: 10". 39.7mm / 1.30mm / .225mm

#7 Nut Assembly
Same as Nut #2, but with bullet nut relief. Width: 1-5/8"; Height: .225"; Spacing: 1.37; Radius: 10". 41.3mm / 1.37mm / .225mm

#8 Nut Assembly
Same as Nut #4, but flatter radius. Width: 1-11/16"; Height: .225"; Spacing: 1.43; Radius: 15". 42.9mm / 1.43mm / .225mm

 

[Zerberus]

Re: Jackson Floyd Nuts

Most USA Jacksons have R3 nuts, the Import nuts are different anyway, and otherwise they select the nut depending on the actual width of the neck

 

[shredist]

Re: Jackson Floyd Nuts

oh god floyd rose nuts
i dont know why they dont make a standard for these! honestly, wouldnt it be obvious to have a nut for a 3mm wrench (why on earth does the "pro" have a 9/64" hole?)