I am using the GT-100 in the 4-cable connection method. (5 with AMP CTRL cable running to AMP).
My Amp footswitch jack on my amp is STEREO which connects a 2-button footswitch (Channel and Master) as the Distortion Channel has 2 master volumes. The AMP CTRL is a MONO port.
I want to make a footswitch where the Boss GT-100 AMP control port connects, with the channel on/off LED, and there is a MASTER select switch on the pedal to switch for solo volume boost.
This picture below is a brainstorm from a 2 button footswitch but did not work out right so I started figuring it out myself, see next post.
My Amp footswitch jack on my amp is STEREO which connects a 2-button footswitch (Channel and Master) as the Distortion Channel has 2 master volumes. The AMP CTRL is a MONO port.
I want to make a footswitch where the Boss GT-100 AMP control port connects, with the channel on/off LED, and there is a MASTER select switch on the pedal to switch for solo volume boost.
This picture below is a brainstorm from a 2 button footswitch but did not work out right so I started figuring it out myself, see next post.
Comment