Hi there everyone. Well long story short I made a pg/jazz hybrid neck several months ago and when I made it I used a polished A4 mag and short staggered adjustable screws under the wound strings. I liked it alot, but I got this crazy idea about doing a passive bass control for the neck pu on my guitar(Edwards LP) and also really wanted to try a polished A2 mag in it as well. I was hoping that the bass control would help with the loose bottom end of the A2 mag and YES it did BUT it also rolled off way to much volume. So I said scew it ripped the bass control out and put the A4 back in. Well now I'm realizing that I realy like the A2 mag alot more than the A4, but the loose sounding low E string is to loose and bassy for my overall liking. Being that the pu is covered I figured I would get some advice on what might be the best way to tighten the loose bottom end before I start R&Ring the cover a half of dozen times experimenting. Any and all info will be appreciated. Thanks in advance Big Kurka
Announcement
Collapse
No announcement yet.
Not sure what to do????
Collapse
X
-
Not sure what to do????
There's no such thing as a stupid question, only stupid mistakes!
Schecter Hellraiser solo-6 and solo-6FR, Schecter C-1EX,
Edwards LP Lemon drop, ES-335 copy, Fender Telecaster
Boss GT-10
Rocktron Velocity 300
Two custom built 2x12 cabs with V-30 & G12T-75's in each cab
Marshall Mode Four/MF 400 cab
AMT Legend series pedals V1, F1, R1, E1, M1, P1, D2 and growingTags: None
-
Re: Not sure what to do????
I will order one. By the way how does the A3 compare to short screws under the wound strings? Also how much will it affect the mids???There's no such thing as a stupid question, only stupid mistakes!
Schecter Hellraiser solo-6 and solo-6FR, Schecter C-1EX,
Edwards LP Lemon drop, ES-335 copy, Fender Telecaster
Boss GT-10
Rocktron Velocity 300
Two custom built 2x12 cabs with V-30 & G12T-75's in each cab
Marshall Mode Four/MF 400 cab
AMT Legend series pedals V1, F1, R1, E1, M1, P1, D2 and growing
Comment
-
Re: Not sure what to do????
I support A3. My personal next step is to order some 1022 like this http://www.ebay.com/itm/Humbucker-Po...a#ht_500wt_922 should help too
Read also here https://forum.seymourduncan.com/show...highlight=1022I get the feeling the A8 will blow your skirt up more so - Edgecrusher
Smooth trades with Jerryjg, ArtieToo, Theodie, Micah, trevorus, Pierre, pzaxtl, damian1122, Thames, Diocletian, Kevinabb, Fakiekid, oilpit, checo, BachToRock, majewsky, joyouswolf, Koreth, Pontiac Jack, Jeff_H
Comment
Comment