I've got a Flying V, with regular wiring (two 'buckers: 59/Custom hybrid, Tonerider Alnico IV; two volumes, master tone, three-way switch). It's always worked great. Recently I took it apart to get it refinished, and when I put it back together, there were problems with it. I figured that, in the process of putting it back, the wires moved and there was some shorting out happening. But I took the pickguard out, plugged it in and got the same issues. No wires are touching, everything looks normal.
Here's the issue: with both volumes at 10, everything works as it should. But, say I'm in the bridge pickup; if I roll down the neck volume, the bridge sound goes away. And viceversa.
Do you know what's wrong with it? I attached some pics, maybe they'll help. Thanks!
![](https://i.imgur.com/BwkY3Oj.jpg)
![](https://i.imgur.com/vkFvWsc.jpg)
![](https://i.imgur.com/ALY8w9k.jpg)
![](https://i.imgur.com/xxDXsoT.jpg)
![](https://i.imgur.com/ttro2dO.jpg)
![](https://i.imgur.com/AYGFuj9.jpg)
Here's the issue: with both volumes at 10, everything works as it should. But, say I'm in the bridge pickup; if I roll down the neck volume, the bridge sound goes away. And viceversa.
Do you know what's wrong with it? I attached some pics, maybe they'll help. Thanks!
![](https://i.imgur.com/BwkY3Oj.jpg)
![](https://i.imgur.com/vkFvWsc.jpg)
![](https://i.imgur.com/ALY8w9k.jpg)
![](https://i.imgur.com/xxDXsoT.jpg)
![](https://i.imgur.com/ttro2dO.jpg)
![](https://i.imgur.com/AYGFuj9.jpg)
![](https://i.imgur.com/VChAmac.jpg)
Comment