hello all ....see attached diagram ....I'd like to do this set-up for a build in work but I'd like to utilize the push pull as an on-off / kill switch ....can someone give me direction on who to solder that in ?? ....and I'd like the up position of the push pull to be OFF and the down position ON, as I do not want to knock the push pull down while playing and turn off the guitar .....THANK YOU for the assist
Announcement
Collapse
No announcement yet.
1 Humbucker / 1 Push Pull Volume / Kill Switch
Collapse
X
-
In your diagram, picture the vol with the DPDT push/pull switch on top. Connect the lead from your pup to the left middle lug of the p/p. connect the top left lug (away from the pot) to the input lug of the vol pot. Connect the lower left lug of the p/p (closest to the back of the pot) to the back of the pot.
When the p/p is pushed in, you get the pup connected to the vol pot. When the p/p is pulled up, you get the lead from the pup connected to ground...off...no sound.Originally Posted by IanBallard
Rule of thumb... the more pot you have, the better your tone.
Comment
Comment