So I have had this combo for years. I switched around the neck PRails so the blade is closest to the neck, it makes it a lot more "stratty" and is great for my PRS style guitar and also doesn't move the P90 position very much at all (perfect for a 24 fret guitar, but mine is 22 frets). But I now want a less sickeningly sweet strat single coil neck tone so I swapped the PRails neck around to normal position with the blade farthest away from the neck. This gives a great strat tone; exactly what I wanted, and also lets me get some 2/4 quack in the middle position with the bridge screw coil; but I think it will sound better with the bridge slug coil.
I would like to rewire the pickups to have the volume push pull be the neck PRails Blade and the CustomCustom bridge slug coil so it is the inner 2 coils; and the tone push pull activate the outer coils. Using both push pulls makes both pickups active in parallell.
I tried for a few hours rewiring but couldn't figure it out; it's been a decade since I initially wired the pickups so I am at a loss.
Can anyone help me with a wiring scheme for a PRails Neck/ CustomCustom Bridge where:
3 way Les Paul style toggle switch between humbuckers.
Vol Push/Pull is inner coils(Blade/CC Slug Coil)
Tone Push/Pull is outer coils(P90/CC Screw Coil)
Both Vol and Tone pulled up puts each humbucker in parallel mode.
I wired it like the below but Volume Push/Pull is PRails Blade/CC Screw and Tone Push/Pull is P90/CC Slug | Both pulled each pickup in parallell.
Thank you for any help![Smilie](https://forum.seymourduncan.com/core/images/smilies/smile.gif)
Cheers!
I would like to rewire the pickups to have the volume push pull be the neck PRails Blade and the CustomCustom bridge slug coil so it is the inner 2 coils; and the tone push pull activate the outer coils. Using both push pulls makes both pickups active in parallell.
I tried for a few hours rewiring but couldn't figure it out; it's been a decade since I initially wired the pickups so I am at a loss.
Can anyone help me with a wiring scheme for a PRails Neck/ CustomCustom Bridge where:
3 way Les Paul style toggle switch between humbuckers.
Vol Push/Pull is inner coils(Blade/CC Slug Coil)
Tone Push/Pull is outer coils(P90/CC Screw Coil)
Both Vol and Tone pulled up puts each humbucker in parallel mode.
I wired it like the below but Volume Push/Pull is PRails Blade/CC Screw and Tone Push/Pull is P90/CC Slug | Both pulled each pickup in parallell.
Thank you for any help
![Smilie](https://forum.seymourduncan.com/core/images/smilies/smile.gif)
Cheers!
Comment