Thanks in advance for your help...
I am trying to wire a bridge humbucker (custom 5) in what I would think would be the simplest 4 conductor configuration; single(N)/HUM/single(S). In other words I want to be able to choose EITHER or BOTH coils. I have HEAVILY researched this for DAYS, visiting all the usual places (SD, DiMarz, GuitarNuts,StewMac,GuitElec, and many, many MANY more). They all suggested an SPST on-off-on switch. Seemed simple enough.
HOWEVER, I have been unable to find such a switch. Common Sense implies that anything that is possible with an SPST on-off-on would also be possible with a DPDT on-off-on. So I got a DPDT on-off-on mini then. But I dont have a schematic for that. SURELY most of you here could do this with your eyes closed!
Once again, this is specifically what I need:
DPDT on-off-on mini toggle switch-
position 1: stud coil by itself (North Coil)
position 2: regular Humbucker (series)
position 3: Adjustable Coil by itself (South Coil)
Thanks
Alternately, if this is somehow not possible, I would settle for parallel/series/single (adj coil-south) with the same dpdt on-off-on switch.
FYI this is for a custom tele (used to be '91 American ultra a long time ago)
its got a custom 5 in the bridge and an Tele Alnico Pro Rhythm (with phase switching) in the neck.
I am trying to wire a bridge humbucker (custom 5) in what I would think would be the simplest 4 conductor configuration; single(N)/HUM/single(S). In other words I want to be able to choose EITHER or BOTH coils. I have HEAVILY researched this for DAYS, visiting all the usual places (SD, DiMarz, GuitarNuts,StewMac,GuitElec, and many, many MANY more). They all suggested an SPST on-off-on switch. Seemed simple enough.
HOWEVER, I have been unable to find such a switch. Common Sense implies that anything that is possible with an SPST on-off-on would also be possible with a DPDT on-off-on. So I got a DPDT on-off-on mini then. But I dont have a schematic for that. SURELY most of you here could do this with your eyes closed!
Once again, this is specifically what I need:
DPDT on-off-on mini toggle switch-
position 1: stud coil by itself (North Coil)
position 2: regular Humbucker (series)
position 3: Adjustable Coil by itself (South Coil)
Thanks
Alternately, if this is somehow not possible, I would settle for parallel/series/single (adj coil-south) with the same dpdt on-off-on switch.

FYI this is for a custom tele (used to be '91 American ultra a long time ago)
its got a custom 5 in the bridge and an Tele Alnico Pro Rhythm (with phase switching) in the neck.
Comment