looking go get rid of the following pickups:
Vintage P-90 Bridge Model - $55 Shipped
this was in the neck of my telecaster for over a decade, and always served me well. once i converted that guitar to a bass vi, i ended up overhauling the pickups, so now this one is seeing no use (i have no other p-90 guitars).
more than enough lead, especially if you are putting it in a bridge position.
Pegasus Humbucker - $65 Shipped
used this for a specific project that is no longer happening, so i took it out of that guitar. tried it in my bass vi, but it just wasn't what i wanted. to my ears, its a fairly neutral-sounding pickup, but with loads of clarity & definition. i think its very specific in its usage, but excels in the appropriate setting.
4-conductor with plenty of lead (i don't think i trimmed this down at all). comes with the original box / packaging.
Stag Mag - $60 Shipped
i bought this for my bass vi project, but it just wasn't the right fit. haven't tried it in anything else, but honestly, i have too many pickups right now, and all of my guitars are currently satisfied. no need to let this collect dust any longer when someone else could be using it.
4-conducter with plenty of lead. has a wide-range-style cover (3 holes per bobbin) that i can remove if you'd like. includes original box / packaging.
Alnico 2 Pro Humbucker - $65 Shipped
80s model (not sure of specific year) wound by MJ. i've had this for years, its been through a few guitars, and it has sounded great in all of them. the only problem i realized recently, is that i really don't care for the specific sound of a2pros (had a neck model as well) anymore.
this isn't in the greatest shape: original fabric tape is long gone and has been replaced by electrical tape that is losing some of its adhesion (i can remove or replace this upon request). one of the bobbins is higher than the other, but its probably an out of place spacer or something (i can look into this).
single conductor with only a couple inches of lead. i soldered on a couple wire extensions that can be removed upon request.
if you have questions about any of these pickups, or need better pictures, please let me know.
Vintage P-90 Bridge Model - $55 Shipped
this was in the neck of my telecaster for over a decade, and always served me well. once i converted that guitar to a bass vi, i ended up overhauling the pickups, so now this one is seeing no use (i have no other p-90 guitars).
more than enough lead, especially if you are putting it in a bridge position.
Pegasus Humbucker - $65 Shipped
used this for a specific project that is no longer happening, so i took it out of that guitar. tried it in my bass vi, but it just wasn't what i wanted. to my ears, its a fairly neutral-sounding pickup, but with loads of clarity & definition. i think its very specific in its usage, but excels in the appropriate setting.
4-conductor with plenty of lead (i don't think i trimmed this down at all). comes with the original box / packaging.
Stag Mag - $60 Shipped
i bought this for my bass vi project, but it just wasn't the right fit. haven't tried it in anything else, but honestly, i have too many pickups right now, and all of my guitars are currently satisfied. no need to let this collect dust any longer when someone else could be using it.
4-conducter with plenty of lead. has a wide-range-style cover (3 holes per bobbin) that i can remove if you'd like. includes original box / packaging.
Alnico 2 Pro Humbucker - $65 Shipped
80s model (not sure of specific year) wound by MJ. i've had this for years, its been through a few guitars, and it has sounded great in all of them. the only problem i realized recently, is that i really don't care for the specific sound of a2pros (had a neck model as well) anymore.
this isn't in the greatest shape: original fabric tape is long gone and has been replaced by electrical tape that is losing some of its adhesion (i can remove or replace this upon request). one of the bobbins is higher than the other, but its probably an out of place spacer or something (i can look into this).
single conductor with only a couple inches of lead. i soldered on a couple wire extensions that can be removed upon request.
if you have questions about any of these pickups, or need better pictures, please let me know.
Comment