Recent content by Hank-

No, its an old drawing. Here's a better one using a resistor+cap in series treble bleed setup,

This setup of treble bleed is the one I like, lets the amount of treble effect to be controlled by the tone knob. ​​​​

https://www.boss.info/global/products/ir-200/ https://youtu.be/6bOIqjh5N_g Its supposed to be an IR loader pedal but also has reverb & some boss amp modeling from the newer GT units. Guessing its gonna cost $300 to $400 judging by the fact that its got their amp sims. While having 100 IRs to...

Ok, modern wiring involves connecting the tone control to the volume pot on the left lug(non-grounded one), the same place where the selector switch hot gets connected, the output jack hot is connected to the middle alone. In your new wiring that you have done, you have connected the tone to the...

Re: 5-way super switch & a P/P switch, 3 mini HBs, ideas? Ok, searching through the web, I found an interesting diagram on strattalk that was taken from tdpri here I redid a crappy drawing of it to study it, need to focus on it in a quiet place. This is an easy mod for those that might not...

I have a 5way super switch & was wondering what I can do with it in a 3 miniHB setup. Simplest seems to be the autosplit in 2 & 4 positions and others where you can have specific combos in the 1,3,5 positions. So I was wondering besides that if its possible to use a P/P switch to get the neck &...

Instead of using the 59b coil, if the hybrid contains the coil from the 59n, would the Custom coil be more dominant to the overall sound? Have lesser humcancelling effect? Anyone tried it? Was it bad? Sounded thinner?

https://www.premierguitar.com/articles/29161-mod-garage-three-ways-to-wire-a-tone-pot Came across this article about the standard volume & tone pot wiring schemes, the "60's" thing was the point of interest in even checking it out. Its basically modern wiring where the tone cap is providing the...

Re: Very angry about the Seymour Duncan and JMI I couldnt copy paste the link, browser issues, so heres a screenshot. Their pickups are of good quality & they ship worldwide or so, plus its in UK so should be easier to get hold of their custom shop.

Its sounds great in the demos, anyone got a handon experience with this or the Mk1 version? https://m.youtube.com/watch?v=MD3EjqF_OJU

Re: Amplitube 4 FREE and how free modelling is changing the marketplace Looks like the tpa3116 amp module. Those are nice, can be run on 12V as well, its not 200W though, around 50W+50W each side in a 4ohm speaker,. 25W in 8ohm & so on. I made a tpa3118 one, had to use rca connectors to keep...

Re: Bourns pots? The datasheet thats available on mouser or digikey etc. contains better description of the potentiometer as per the part no. I've attached a screenshot of a page from the datasheet that helps to know what your getting. Bourns have various series, the cheap PDB183(?) or...

I've been looking at these for live use for monitoring. Going by the specs the irtx seems to cover a broader range although not by much than the LFR. The LFR does have a 12" driver compared to the 8" one in the irtx. My gut feeling says that it might be an improvement soundwise but since both...

I had an idea of using a small size pot with a small knob as a blender for neck & bridge. That would allow me to fit it more easily in the cramped space left in the cavity of my strat copy, the electronics arent mounted on the pickguard. Which brings me to the question of whether any value pot...

In this link: https://www.seymourduncan.com/wp-content/uploads/2015/05/SCHSCHSCH_5W_1Vpp3SPL_2T.jpg Is it possible to have the middle & neck share one tone control & bridge have its own, without adding extra switches or a super switch? I have not seen a diagram for splitting all p'ups like...